TAYLOR “MONOPLANE”€

Gemini Sparkle

Key Takeaways:

  • The Monoplane is a single-place taildragger designed for low-powered engines (30-65 hp), featuring all-wood construction with a 1/16-inch plywood stressed skin.
  • It was specifically designed for amateur builders who may not have comprehensive workshop facilities.
  • The aircraft incorporates an airfoil section chosen for its high-lift and gentle stall characteristics.
  • No modifications have been made to the design since its first prototype flew in June 1960.
See a mistake? Contact us.
STANDARD DATA: Gross wt. 620. Empty wt. 410. Fuel capacity 7.5. Wingspan 21′. Length 15′.
PERFORMANCE: Top mph 105. Cruise mph 90. Stall mph 38. Climb rate 950. Takeoff run 200. Landing roll 150. Range 230.

The Monoplane single-place taildragger was designed to house low-powered engines in the 30- to 65- hp range, like the English JAP or the German VW (both air-cooled). Some say that the Taylor Monoplane bears a striking resemblance to the World War II Spitfire. It features all-wood construction and is covered with a 1/16-inch plywood stressed skin. The ribs are conventional built-up-truss type in a basic box design. The aircraft was designed especially for the amateur builder who does not have a comprehensive workshop at his or her disposal. The airfoil section was carefully chosen for its high-lift and gentle stall characteristics. Since the first prototype flew in June 1960, no modifications of any kind have been incorporated.

Plane & Pilot

Plane + Pilot is general aviation’s only adventure-based magazine. From where to go, to how to get there, and everything in between, your next great adventure awaits.
Subscribe to Our Newsletter

Get the latest Plane & Pilot Magazine stories delivered directly to your inbox

SUBSCRIBE