WAR “CORSAIR”€

Gemini Sparkle

Key Takeaways:

  • The half-scale Corsair is a homebuilt aircraft constructed with a plywood core covered in styrofoam and fiberglass, featuring conventional wooden wing and tail structures.
  • It is equipped with an air-oil oleo landing gear system that utilizes either electrical or manual ratchet retraction.
  • It can accommodate engines ranging from 65 to 125 hp (typically a 100-hp Continental), achieving cruise speeds of 145 mph, a top speed of 170 mph, and a range of 400 to 500 miles.
See a mistake? Contact us.
STANDARD DATA: Gross wt. 900. Empty wt. 600. Fuel capacity 12-15. Wingspan 20′. Length 16’6″. Engine 100-hp Continental.
PERFORMANCE: Top mph 170. Cruise mph 145. Stall mph 55. Climb rate 1,200. Range 400-500. Takeoff run 800-1,000.

The half-scale Corsair is built around a plywood box core and covered with styrofoam and fiberglass, in the manner of the KR-1 and KR-2 homebuilts. The fuselage is a standard four-longeron torsion box, while the tail and wings use conventional wooden structure. The wing is made from a laminated plywood-covered hollow front spar. The rear spar is laminated as a solid single-piece unit faced with plywood. Plywood ribs are used at the root, the center-section joints, and the tip sections. For landing gear, an air-oil oleo system is used, with either an electrical or manual ratchet system for retraction. Engines in the 65- to 125-hp range can be used, so performance varies greatly.

Plane & Pilot

Plane + Pilot is general aviation’s only adventure-based magazine. From where to go, to how to get there, and everything in between, your next great adventure awaits.
Subscribe to Our Newsletter

Get the latest Plane & Pilot Magazine stories delivered directly to your inbox

SUBSCRIBE