TINKER TOY

Gemini Sparkle

Key Takeaways:

  • The Tinker Toy is built around a high-lift Fly Baby wing and powered by a 140-hp Corsa engine with a Warrike ground-adjustable pusher propeller designed to reduce cabin noise.
  • To avoid using a long drive shaft, the engine is mounted under the wing at the center of gravity, with a specialized spar configuration connecting the tail around the spinning prop.
  • Performance and structural highlights include a 100 mph cruise speed, a 300-mile range, fuel burn of 4.5 gph at 3,500 RPM, and landing gear fabricated from heat-treated truck leaf springs.
See a mistake? Contact us.
STANDARD DATA: Gross wt. 1,650. Empty wt. 1,188. Fuel capacity 20. Wingspan 28’3″. Engine 140-hp Corsa.
PERFORMANCE: Cruise mph 100. Stall mph 60. Range 300.

Powered by a 140-hp Corsa engine, the Tinker Toy was built around a Fly Baby wing and makes use of a pusher prop to keep the cabin quiet. The powerplant burns 4.5 gph at 3,500 RPM and turns a Warrike ground-adjustable prop. The Fly Baby wing was selected for Tinker Toy because it was a high lift wing. To get away from a long drive shaft running back to behind the tail, the engine was hung underneath the wing at CG position with the prop spinning right behind the trailing edge. A bottom spar and top member were then used to carry a large vertical fin, leaving clearance for the propeller blades. It took some engineering to design the top spar that attached the tail to the center point of the spinning propeller hub. Landing-gear legs were made from heat-treated truck leaf-spring stock with the wheels encased in fiberglass pants.

Plane & Pilot

Plane + Pilot is general aviation’s only adventure-based magazine. From where to go, to how to get there, and everything in between, your next great adventure awaits.
Subscribe to Our Newsletter

Get the latest Plane & Pilot Magazine stories delivered directly to your inbox

SUBSCRIBE